End Fed EFHW-8010P 80M-10M wire antenna Review

EFHW-8010P- 200W Portable or Stationary Multi-Band End Fed Half Wave Antenna This is a 200W version of popular EFHW-8010 End-Fed Half-Wave (EFHW*) antenna for 80/40/30/20/17/15/12 and 10m bands. Unlike many END FED antennas on the market, this one does not require the Antenna Tuner to operate. It is a resonant Half wave on 80m (3.5MHz) therefore also resonant on second, third and fourth harmonics etc. Due High Impedance feed point, the antenna is less height dependent. You can put it up at 10 or 50 feet in the air without much change in VSWR values. *This is perfect antenna for ALE HF-link stations, NVIS, MARS, ARES, EMCOMM etc. Various installations such as horizontal, vertical, as inverted V, as inverted L, zigzag etc. are possible. Measured VSWR in the gallery are taken with the antenna in an inverted V shape with the center of wire at 20 feet and ends a few feet above ground, your values could vary with way and height of installation. NO TUNER needed! NO counterpoise needed! Frequency coverage: 3-30MHz Resonant on 80/40/30/20/17/15/12/10m Wire length ~130 feet Power Handling: 200W I.C.A.S Stainless Steel hardware Stealth Marine #18 AWG black wire Connector: Silver/Teflon SO-239 *Grounding of the coaxial cable at radio side is recommended for protection of your equipment from an electrostatic buildup in order to prevent ESD- electrostatic discharge. NOTE: grounding does not affect antenna tuning.