AnyTone APOLLO I 10 Meter Radio can convert into 11 meter CB Radio Kit 40 Channel for truck Review

AnyTone APOLLO I 10 Meter Radio can convert into 11 meter CB Radio Kit 40 Channel for truck

    This fits your .
  • Make sure this fits by entering your model number.
  • ☛EASY TO MODIFY FOR CB RADIO USAGE The default frequency 28.000-29.700Mhz (10 meter Radio), if you need it to be CB Radio, to remove soldering will change the radio to 25.615-30.105Mhz(OP1 grounded) or 26.965-27.405 mode(OP1 and OP2 both grounded)).Please send the email to seller (us) if you need the instruction documents.
  • ☛Power Output 4 WattsFM 1/4Watt AM S/RF meter display. Radio voltage is shown on the LCD display.Full Aluminum body offer best heat radiation, Remote control microphone with Wide angle Dot matrix LCD Multiple norms: EU, EUH, CE, UK, PL, E1, I2, DE, DEH , 3 color display: Blue, Purple, Orang,great cb radio and 10 meter radio
  • ☛ GREAT LITTLE RADIO Modulation Mode:AM/FM,It sounds very loud and very clear. Great super small CB radio It is good for fitting in any vehicle or radio shack or atv.It is great for a holiday road trip or for local traffic reports.
  • Dual watch, Full channel scan, EMG Channel CH9/19, NB/ANL Function,SQ and ASQ Control,RF Gain control,LCD backlight control,LCD Brightness and Dimmer control,4 Memory channels for each Norm,SQ, VOL,great 10 meter CB Radio Kit 40 Channel for truck
  • ☛WARRANTY 1 year warranty. Money back if you are not satisfied with it in 1 month. Please feel free to contact with us if you have any query. We will give you prompt reply and good after service

 AnyTone APOLLO I 10 Meter Radio can convert into 11 meter CB Radio Kit 40 Channel for truck. great cb radio 10 meter radio
GENERAL

Modulation Mode AM/FM

Factory default setting mode: 28.000-29.700Mh

Frequency Range 26.965-27.405Mhz (The radio is default setting on 28.000-29.700Mhz, to remove soldering will change the radio to 25.615-30.105Mhz(OP1 grounded) or 26.965-27.405 mode(OP1 grounded). Please send the email to seller (us) if you need the instruction documents.)

Frequency Tolerance 5.0ppm

Input Voltage 13.2V
Dimensions(in mm) 112mm(L) x 143mm(W) X 30mm (H)

Weight 785g

Ferquency Control PLL Synthesizer

Operating Temperature Range -20° C TO + 55° C

Current Drain Transmit 1.4A MAX

Receive Squelched 0.4A

VOL Max 1.3A

Antenna Connector UHF,SO-239

TRANSMITTER

Power Output 4 WattsFM 1/4Watt AM

Transmission interference inferior to 4nW(-54dBm)

Frequency Response 300-3000Hz

Modulated signal distortion inferior to 5%

Output Impedance 50 ohms

RECEIVER

Sensitivity Less than 1uV for 10dB(S+N)/N

Image Rejection 70dB

Adjacent Channel Rejection 60 dB

IF Frequencies

1st 10.695MHz

2nd 455KHz

Automatic Gain Control(AGC)

Less than 10dB change in audio

Output for inputs from 10 to 50000uV

Squelch less than 1uV

Audio Output Power 2Watts

Frequency Response 300-3000Hz

Leave a Reply

Your email address will not be published. Required fields are marked *